Zeke Durica
|
5/19/2019 9:04 AM
|
Contact ensign spars they have custom made blocks that you will not find any others sources that are better. Those are very important blocks to especially for that application.
Zeke
|
|
|
Anthony Cannone
|
5/19/2019 8:13 AM
|
Hi All, Anybody know a source for either new or like new original type Halyard Cheek Blocks for the Ensign Mast? The blocks are located on either side of the mast toward the base and have a two 1/4" diameter hole mounting scheme about 2.5" apart, see attached pic's.
The only new cheek block I could find was the Harken 29mm Bullet Block however the hole locations are too close together.
Any ideas are much appreciated!
Thanks, Tony Cannone Ensign 530
|
|
|