I have disposing of my Ensign #1491.

It was unfortunately "totaled" when an unmanned powerboat rammed into its side in Harbor Springs Michigan.

I have several used sails available.

A main sail that has only been used for one season - $1,150 when originally purchased in 2021

A high clew jib - $600 when originally purchased in 2021

I'm willing to take best offer for the sails.

Additionally I have an older main, Genoa, jib and spinnaker for sail.

Finally, I have plenty of used parts from the boat that are available.

I'm interested in the main and possibly more. I'm not sure if this will post on the forum or will send you an email directly, but I have included my contact information below:

Josh Caselli

josh.caselli@gmail.com

585-406-7684

Hi Richard,

Sorry to hear about your Ensign.

I’m looking for a boom vang. I am also looking to replace my traveler car for the main sheet. 

Following up. I found a boom vang. still looking for a traveller car, and may also be interested in your high clew jib. Is it hanks or furler? I have a a harken furler.

Jim Cain 

S/V Cerulean

#1633

Sent from my iPhone

617 276 5708

jamesmcain3@gmail.com

Sorry for your tragic loss.

I reside in the Harbor Springs area and am interested in in what may be salvaged that could be useful for #100.

In particular, the genoa and related rigging.

Allen Talcott

at@sturgeonsurf.com

Hi Richard – Sorry to hear about your boat. Id be interested in any furling jib you may have.

Mitch Kayden

845-709-5607

mtkayden@gmail.com

Good morning,

Sorry to hear about your Ensign. My name is Jeff Ragains and I recently purchased Mike Barr's #1451 also out of Harbor Springs.

I am also interested in sails, the mains especially. I am actually in Harbor Springs tomorrow picking the boat up at Irish if we can put something together.

Thank you,

Jeff

I'd be interested in the forward lower shroud if it's available.

Thanks,

Chance

Vesper #403

Hi Richard,

I'm sorry to hear about your boat. It's a big loss.

We would be interested in any smaller fittings you might have. We are looking for a bow chock which on our Ensign appears to be the same size as the chock pair at the stern. Also interested in any Harken blocks you may be selling; or anything from the main or jib sheets, the traveller system, etc.

Symantha #236

508-397-8316

Hello Richard,

So sorry to hear.

The fittings on our rudder post/tiller just cracked/crumbled. Do you have the tiller hardware available and would you be interested in selling it? Any help would be greatly appreciated!

I would be interested in the complete traveler system and possible winches.

thanks

Stu Craig

860-918-1158

goombaysma@aol.com 

Thank you, here is a pic of the actual part that broke.

Hi Richard, you don't happen to have a #2 Genoa, do you? - I'm also on the hunt for an adjustable backstay and a couple of lower bolts for the turnbuckles as a couple of mine have bent somehow.

Lindsey B.

970.820.0484

Elysium

Richard,

im sorry to hear about your ensign. I would be interested in the boom provided that it had an internal outhaul system

thank you

Mauricio

#1751

Do you have any genoa track cars, for 22mm track (it’s about .85 inches, I believe old harken track). Thanks

John Burnap | John@burnap.com | 401.741.2081

Catalyst and Thinker-Upper-Of-Stuff

https://www.linkedin.com/in/johnburnap