Skip to main content

ECA Logo Version 11 

General Classifieds

Cabin drain
searchSearch
Search

Hey there,

Doing work on El' BOB-Arino's cabin (2 years of rehab) and ....finally noticed that there is no drain line or hole in the cabin.. There are what looks like what was supposed to be 2 drain holes or vent holes near the sole in the cabin facing aft, but it looks like a past install of a new cabin bulkhead blocks the holes (there is no through). Always assumed they drained, but they don't.


The cabin gets water in after storms and accumulates maybe 2 inches inside the cabin after bad storms. Yes I have a cover...


Is it possible to drill a 1/2 inch hole in the sole of the aft part of the cabin near the bulkhead and add a drain tube directly to the bilge? Seems like a simple fix. Would like as much of a flush drain (not mushroom type) as possible.

Is this possible? Any suggestions on hardware? Want as small as possible of a hole. Just need to drain as much a a gallon of water at times.


Appreciate any help.

Hi Robert,

Yes, go right ahead and drill that half inch hole. I caulked in a small piece of half inch diameter vinyl tube to seal it. That will drain any water you get into the cabin right into the bilge.

Pete Kogut

Ensign#856

Canandaigua, NY

arrow_backReturn to Forum
Sponsor Number URL address
Sponsor 1 https://www.quantumsails.com/en/default
Sponsor 2 http://www.triadtrailers.com/
Sponsor 3 http://www.ussailing.org
Sponsor 4 http://www.northsails.com
Sponsor 5 http://www.spectrumphotofg.com
Sponsor 6 http://www.defender.com
Sponsor 7 http://www.ensignspars.com
Sponsor 9 http://www.patterson-marine.com
Sponsor 10 https://stores.crsapparel.com/ensign_class/shop/home
Sponsor 11 https://zbloksun.com/

ENSIGN CLASS Sponsors